苝二酸酐与嘧啶衍生物的氢键组装

用半经验AM1方法对苝二酸酐与嘧啶衍生物的1:1及1:2氢键复合物进行理论研究,表明随着氢键数目增多,弱相互作用能变大,主体上的供电基和客体上的吸电基有利于氢键相互作用,氢键导致电子从主体流向客体.用INDO/SCI方法计算配合物的电子光谱,表明其长波吸收峰与主体相比发生兰移,各配合物的长波吸收峰位置相差不大,与实验一致.讨论吸收峰兰移的原因并对电子跃迁进行理论指认,同时得到了配合物的双质子转移势能曲线,给出了相对于N-H键的过渡态和活化能.     

Melt-polymerizable bisimido-bisphthalonitriles containing silicon,fluoro, and ether groups: Synthesis,characterization, and NMR study

Various melt-polymerizable bisimido-bisphthalonitrile polymer precursors were synthesized by the reaction of 4-aminophthalonitrile (4-APN) with bis(3,4-dicarboxyphenyl) dimethylsilane dianhydride (SIDA), 4,4′-hexafluoroisopropylidene diphthalic anhydride (6FDA), bis(3,4-dicarboxyphenyl)ether dianhydride (ODPA), and 3,3′, 4,4′-tetracarboxylichenzophen+ne dianhydride (BTDA) in an aprotic solvent. The synthesized monomers showed crystalline melting at 269 and 271°C. Elemental analysis, differential thermal analysis (DTA), infrared (IR), nuclear magnetic resonance (¹H-NMR) and mass spectral studies were carried out to characterize the synthesized monomers. Thermogravimetric analysis (TGA) of the synthesized monomers showed their thermal stability at 410–400°C. A detailed study and NMR investigation of the first step of condensation reaction was carried out and indicated the formation of a transient charge transfer complex. Thermal cyclization of the formed intermediate, however, gave the required monomers. A preliminary study demonstrated that melt-polymerization of the synthesized monomers gave thermallystable, tough polymers.     

热致性液晶聚酯酰亚胺高分子的合成

本文以己二胺，癸二胺和对－亚苯基－双苯偏三酸酯二酐为单体通过溶液聚合反应制备了聚酯酰亚胺系列共聚物．采用ＩＲ，ＷＡＸＤ，ＤＳＣ和偏光显微镜研究了共聚物的结构和液晶性能，结果表明，聚合物具有热致液晶性，且随二胺单体摩尔组成的变化，共聚物的熔点Ｔｍｌ和玻璃化转变温度Ｔ８呈规律性变化．     

An effective and regioselective bromination of 1,4,5,8-naphthalenetetracarboxylic dianhydride using tribromoisocyanuric acid

A highly efficient and cost-effective reagent for the bromination of 1,4,5,8-naphthalenetetracarboxylic dianhydride under mild reaction conditions is reported. Bromination of 1,4,5,8-naphthalenetetracarboxylic dianhydride using tribromoisocyanuric acid (TBCA) in concentrated H₂SO₄ is very effective and regioselective. 1,4,5,8-Naphthalenetetracarboxylic dianhydride was brominated smoothly under optimized reaction conditions to give mono-, di- and tetra-brominated products in good to excellent yields using TBCA. As a proof of principle, the potential of this bromination methodology is demonstrated by converting brominated naphthalenetetracarboxylic dianhydrides into N-imide and core functionalized 1,4,5,8-napthalenetetracarboxylic diimides by treating with n-butylamine to yield corresponding mono-, di- and tetra-(n-butylamino)-naphthalene diimides in good yields in one-step reactions.     

Hydrolytic Ring Opening Reactions of Pyromellitic Dianhydride for Divalent Transition Metal Carboxylate Complexes

The hydrolytic ring opening reactions of pyromellitic dianhydride is an effective method to prepare transition metal carboxylate complexes. In this paper, two dinuclear complexes [Ni₂(2,2′‐bipy)₂(btec)(H₂O)₆] · 2H₂O ( 1 ) and [Cd₂ (phen)₄(H₂O)₂(H₂btec)] · H₂btec · 2H₂O ( 2 ) (H₄btec = 1,2,4,5‐benzenetetracarboxylic acid, phen = 1,10‐phenanthroline, and 2,2′‐bipy = 2,2′‐bipyridine) were synthesized by slow diffusion methods and their structures were determined byX‐ray structure analysis. In both structures metal atoms are in distorted octahedral environments and they are linked by bis‐monodentately coordinated 1,2,4,5‐benzentetracarboxylate ligands as bridging units. The crystalline compounds, which are insoluble in water as well as common organic solvents, have been characterized in the solid‐state by elemental analysis, thermogravimetric analysis, IR, and diffuse reflectance UV/Visspectroscopy. Moreover, the study of the physical properties of complex 2 demonstrates that it exhibits blue fluorescence emission in the solid state at room temperature.     

A novel efficient synthetic method for 2,2＇,3,3＇-biphenyltetracarboxylic dianhydride

A novel approach to the synthesis of 2,2',3,3'-biphenyltetracarboxylic dianhydride is described. The target compound was prepared by a nickel-catalyzed coupling reaction of dimethy 3-chlorophthalate (3-DMCP) for 4 h at 70-80℃, followed by subsequent hydrolysis of tetra-ester in acid solution and dehydration of tetra-acid, with overall yield of 68%. The structures of the products were characterized by IR, ¹H NMR and ¹³C NMR respectively.     

Solution‐processable colorless polyimides derived from hydrogenated pyromellitic dianhydride with controlled steric structure

This work presents novel colorless polyimides (PIs) derived from 1R,2S,4S,5R‐cyclohexanetetracarboxylic dianhydride (H″‐PMDA). Isomer effects were also discussed by comparing with PI systems derived from conventional hydrogenated pyromellitic dianhydride, that is, 1S,2R,4S,5R‐cyclohexanetetracarboxylic dianhydride (H‐PMDA). H″‐PMDA was much more reactive with various diamines than H‐PMDA, and the former led to PI precursors with much higher molecular weights. The results can be explained from the quite different steric structures of these isomers. The thermally imidized H″‐PMDA‐based films were colorless regardless of diamines because of inhibited charge‐transfer interaction. In particular, the H″‐PMDA/4,4′‐oxydianiline system simultaneously achieved a very high T_g exceeding 300 °C, high toughness (elongation at break > 70%), and good solution processability. In contrast, the H‐PMDA‐based counterparts were essentially insoluble. The outstanding solubility of the former probably results from disturbed chain stacking by its nonplanar steric structure. An advantage of chemical imidization process is also proposed. In some cases, a copolymerization approach with an aromatic tetracarboxylic dianhydride was effective to improve the thermal expansion property. The results suggest that the H″‐PMDA‐based PI systems can be promising candidates for novel high‐temperature plastic substrate materials in electronic paper displays. A potential application as optical compensation film materials in liquid crystal displays (LCD) is also proposed in this work. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

含硫醚链节的透明聚酰胺酸的合成及表征

合成了一种具有耐高温、氧化稳定性及透明性的聚硫醚酰胺酸，并对各步中间产物进行了基本表征。讨论了温度对硫醚二酐形成的影响。     

Cycloaliphatic-aromatic polyimides based on diamines with azobenzene unit

A new family of functionalized semiaromatic polyimides has been developed. Cycloaliphatic-aromatic polyimides, derived from the polycondensation of 1,2,3,4-cyclopentanetetracarboxylic dianhydride (CPDA) with various diamines bearing azobenzene group, have been prepared and characterized. Molecular structural characterization for the resulting polymers has been achieved by ¹³C NMR, ¹H NMR, FTIR and UV-visible spectroscopies. Light-induced optical anisotropy, in novel azobenzene functionalized polyimides, has been studied by holographic polarization grating recording performed at 514.5 nm line of Ar⁺ laser. Two-wave mixing technique has been employed to inscribe the gratings in these polymers. Formation of gratings has been investigated with two s-s and s-p polarized writing beams. The kinetics of grating recording observed within the studied polymers is discussed in relation to their structure.     

单氯代苯酐及其衍生物的合成方法研究进展

讨论了3(4)-氯代苯酐的主要合成方法以及它们的主要衍生物联苯二酐和二苯醚二酐等的合成方法和主要用途. 综合比较了各种合成方法的利弊, 并分析了这些化合物的国内外研究现状和发展趋势.